YINGFA
Widely used in ports, stations, logistics, factories, warehouses, is an essential equipment for cargo handling.
Product advantages:
1. Easy to use. Automatic transmission operation is simple, greatly improve work efficiency.
2. High safety performance. Key safety components such as steering axle body, drive axle housing and forklift mast have passed strict reliability tests.
3. High comfort. Wide vision of forklift mast, adjustable seat, small diameter steering wheel, electronic file, can reduce user fatigue.4. Long service life of engine, low failure rate.
Adopt high-end controller, motor output is stable and strong, lithium battery is safe and reliable.
Product advantages:
1. High-end controller. Remote detection of forklift faults.
2. Low use cost. Compared to diesel forklifts, it saves $8,500 a year in fuel and maintenance costs.
3. Fast battery charging, long service life. Two hours full charge, 0.5 hours can charge 80%, the battery life is 8-10 years.
4. Safe and reliable. Collision, extrusion, high and low temperature impact, will not explode or fire.
5. Suitable for high and low temperature working environment. It can work normally at -40℃~60℃.6. Zero pollution. No exhaust emissions during operation.
Dual fuel, using butane or propane as fuel, can also use gasoline as fuel, low noise, no pollution or less pollution.
Product advantages:
1. Environmental protection, no exhaust gas will be produced after combustion.
2. Low use cost. The price of natural gas is lower, and the cost of using forklifts is also lower.
3. Reliable and mature engine performance, low failure rate.
The off-road forklift has two kinds of structure: articulated type and integrated type. Four-wheel drive off-road, can be driven on hills, mountains, sand, snow and muddy roads.
Product advantages:
1. Four-wheel drive function, can work in a variety of harsh sites, strong off-road power.
2. Wide and big body, can carry all kinds of irregular goods.
3. The clearance from the ground is high, and it can cross the obstacles on the field.
Three wheel electric forklift, reach lift truck, straight arm forklift, container forklift, can be designed and manufactured according to customer requirements.
Pallet truck, including hand pallet truck and electric pallet truck.Stacker, including manual stacker and electric stacker.The lifting platform, including curved arm lifting platform and straight arm lifting platform.Dock leveler.
Product Detail
越野叉车有铰接式和一体式两种结构。四驱越野，能够在丘陵、山地、沙地、雪地及泥泞道路上行驶。
产品优势：
1.有四驱功能，可以在各种恶劣场地工作，越野动力强。
2.车身宽大，能承载各类不规则货物。
3.离地间隙高，可以跨越场地上的障碍物。
Third, off-road forklift
The off-road forklift has two kinds of structure: articulated type and integrated type. Four-wheel drive off-road, can be driven on hills, mountains, sand, snow and muddy roads.
Product advantages:
1. Four-wheel drive function, can work in a variety of harsh sites, strong off-road power.
2. Wide and big body, can carry all kinds of irregular goods.
3. The clearance from the ground is high, and it can cross the obstacles on the field.
| model | Unit | YFC100A |
| Dynamic type | Automatic | |
| Maximum lifting capacity | Kg | 10000 |
| Center distance of load | mm | 600 |
| mm | 300-600 | |
| Full height of gantry (cargo fork landing, gantry vertical) | mm | 2630 |
| Free elevation height | mm | 150 |
| Shelf height (from the fork surface of the door frame) | mm | 1196 |
| Distance from seat surface to roof guard | mm | 1050 |
| Full height | mm | 3200 |
| Full length (without cargo fork) | mm | 5250 |
| Before hanging from | mm | 685 |
| Suspension from | mm | 1750 |
| The wheelbase | mm | 3000 |
| Traction pin height | mm | 970 |
| Minimum ground clearance (at gantry) | mm | 456 |
| Full width | mm | 2300 |
| Lateral fork distance (Max/min) | mm | 1350/300 |
| Wheel pitch (front/rear) | mm | 1910/1910 |
| Minimum turning radius outside | mm | 6000 |
| Minimum inside turning radius | mm | 4500 |
| Angle of gantry (front/rear) | mm | First 8 and last 10 |
| Pallet fork size | mm | 1220*50*150 |
| Maximum driving speed (full load/no load) | Km/h | 28/33 |
| Speed increase (full load/no load) | mm/s | 350/500 |
| Speed drop (full load/no load) | mm/s | 550/450 |
| Maximum climbing capacity (full load/no load) | % | 20/30 |
| Total weight | Kg | 9500 |
| Slope angle | ° | 35 |
| Forward and backward tilt angles | ° | 10/6 |
| Driving speed | Km/s | 30 |
| Weight Distribution Full load (front/rear) | Kg | 16150/3350 |
| Weight distribution No load (front/rear) | Kg | 3390/6110 |
| Number of wheels X/ driving wheels | 4-6X/6 | |
| Type of tyre (front/rear) | Pneumatic tire | |
| The rear tyre | 17.5-25 | |
| Service running brake | Hydraulic braking | |
| Parking stop brake | Mechanical | |
| Lighting and signals | Headlights, turn signals, brake lights, reverse horn | |
| Dashboard | Liquid crystal display | |
| Drive axle | 30 Cast Steel Bridge | |
| Tire model | 12R-22.5 Wire Spoke Wheel Rim | |
| Turning to | Front Articulated | |
| Braking method | Manual Brake, Air Brake | |
| Lifting cylinder | Reinforced Sealed Double Cylinder | |
| Fork length | 1520 Forged Fork | |
| Gantry dimensions | International Mast | |
| Gantry material | Special Forklift Mast Steel | |
| Steering method | Hydraulic Power Steering | |
| Turning radius | 4500mm | |
| Drive mode | Four-Wheel Drive | |
| Driver's cab | Full Enclosure Luxury Cabin | |
| Voltage | V | 24 |
| Transmission | 315 Torque Converter | |
| Model of engine | Deutz 6105 |
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
Top
Entrance
