图片展示

Widely used in ports, stations, logistics, factories, warehouses, is an essential equipment for cargo handling.

Product advantages:

1. Easy to use. Automatic transmission operation is simple, greatly improve work efficiency.

2. High safety performance. Key safety components such as steering axle body, drive axle housing and forklift mast have passed strict reliability tests.

3. High comfort. Wide vision of forklift mast, adjustable seat, small diameter steering wheel, electronic file, can reduce user fatigue.4. Long service life of engine, low failure rate.

Adopt high-end controller, motor output is stable and strong, lithium battery is safe and reliable.

Product advantages:

 1. High-end controller. Remote detection of forklift faults.

 2. Low use cost. Compared to diesel forklifts, it saves $8,500 a year in fuel and  maintenance costs.

 3. Fast battery charging, long service life. Two hours full charge, 0.5 hours can charge  80%, the battery life is 8-10 years.

 4. Safe and reliable. Collision, extrusion, high and low temperature impact, will not  explode or fire.

 5. Suitable for high and low temperature working environment. It can work normally at -40℃~60℃.6. Zero pollution. No exhaust emissions during operation.

Dual fuel, using butane or propane as fuel, can also use gasoline as fuel, low noise, no pollution or less pollution.

Product advantages:

1. Environmental protection, no exhaust gas will be produced after combustion.

2. Low use cost. The price of natural gas is lower, and the cost of using forklifts is also lower.

3. Reliable and mature engine performance, low failure rate.

The off-road forklift has two kinds of structure: articulated type and integrated type. Four-wheel drive off-road, can be driven on hills, mountains, sand, snow and muddy roads.

Product advantages:

1. Four-wheel drive function, can work in a variety of harsh sites, strong off-road power.

2. Wide and big body, can carry all kinds of irregular goods.

3. The clearance from the ground is high, and it can cross the obstacles on the field.

Three wheel electric forklift, reach lift truck, straight arm forklift, container forklift, can be designed and manufactured according to customer requirements.

Pallet truck, including hand pallet truck and electric pallet truck.Stacker, including manual stacker and electric stacker.The lifting platform,  including curved arm lifting platform and straight arm lifting platform.Dock leveler.

Product Detail

柴油叉车

广泛应用于港口、车站、物流、工厂、仓库,是货物装卸必不可少的设备。

产品优势:

1.使用方便。自动挡操作简单,大幅度提升工作效率。

2.安全性能高。转向桥体、驱动桥壳、门架等关键安全部件均通过严格的可靠性实验。

3.舒适度高。门架宽视野、座椅角度可调、小直径方向盘,电子调档,可降低使用者的疲劳。

4.发动机使用寿命长,故障率低。

Firstly, diesel forklift

Widely used in ports, stations, logistics, factories, warehouses, is an essential equipment for cargo handling.

Product advantages:

1. Easy to use. Automatic transmission operation is simple, greatly improve work efficiency.

2. High safety performance. Key safety components such as steering axle body, drive axle housing and forklift mast have passed strict reliability tests.

3. High comfort. Wide vision of forklift mast, adjustable seat, small diameter steering wheel, electronic file, can reduce user fatigue.

4. Long service life of engine, low failure rate.



型号ItemUnitYFD100-ISUZU
控制方式Control modeManual/automatic自动/automatic
动力型式Power typeDiesel/gasoline柴油/diesel
额定载荷Load capacityKg10000
起升高度Lift heightmm3000
载荷中心Load centremm600
整机重量dead weightKg12860
车长/带货叉Full length / forkmm5340
车长/无货叉Full length / fork freemm4270
车宽Full widthmm2165
门架落地高度Landing height of gantrymm2840
自由起升高度Free lifting heightmm100
货叉尺寸Fork sizemm1070*175*80
门架倾角Door trame angle前/后6°/12°
最小转弯半径Minimum turning radiusmm4080
最小直角通道宽度Minimum right angle channel widthmm5525
最小离地间隙Minimum ground clearancemm225
最大起升速度(满载)Maximum lifting speed/full loadmm/m340
最大行驶速度(满载)Maximum driving speed/full loadKm/h22
最大爬坡度Max Gradient%22
轴距wheelbasemm2800
前悬距Front suspensionmm720
轮距Wheelbasemm1600/1800
前轮胎Front tires
9.00-24-14PRT
后轮胎Rear tire
9.00-24-14PRT
蓄电池(电压/容量)Battery(voltge/capacityV/Ah12/2*80
发动机型号Engine model
ISUZU
额定功率Rated powerKW/r.p.m85/2200
杠数Number of cylinders
4
发动机标准Engine standard
Euro 2/3/4











YFD100-ISUZU
Long press to look detail
Long by picture save/share
INQUIRY

ONLINE INQUIRY MORE+
  • contacts *

  • mobile phone *

  • describe

  • Submit

  • Security Code
    Refresh the code
    Cancel
    Confirm

Inquiry Content:


You have no items to require

Add Successfully
Top

 

Send Your Message To Us

  • Name *

  • Mobile *

  • E-mail

  • Country *

  • Province *

  • City *

  • Message

  • 提交

  • Security Code
    Refresh the code
    Cancel
    Confirm

Entrance


Service Center

Please choose online customer service to communicate

Contacts
Mobile:
+8619963310888
Scan a QR Code
Qrcode
WeChat
添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了